Kamieniec II

Xaoc Devices 10HP
PHASER FILTER LFO UTILITY

Verified sheet

The facts on this sheet have been cross-checked against the sources below.

Sources
Suggest a correction

Analog resonant phase rotator with 4/6-stage outputs, voltage-controlled resonance, syncable triangle LFO, external modulation input, independent LFO out, and optional Allpass Expansion to 22 stages.

Patch Ideas · 5

★ Stereo sweep
Send a mono voice through the phaser · take Output A and Output B as a faux stereo pair · slow triangle LFO moves the notches apart · classic widening without external modulation.
▸ Show diagram
Patch diagramPatch diagram with 4 modules and 4 connections. Modules: Kamieniec II, VCO, LFO, Output. Signals: 3 audio, 1 cv.Kamieniec IIVCOLFOOutputTuning FREQ: noonDepth: lowReso: lowResonance mode switch: stonedInputaudioExt modcvOutput AaudioOutput BaudioOutaudioOutcvLaudioRaudioaudiocv
★ Clocked swirl
Trigger the LFO reset from clock pulses · the sweep restarts each bar · use the phase rotator like a clock-locked filter animation for rhythmically consistent motion.
▸ Show diagram
Patch diagramPatch diagram with 5 modules and 4 connections. Modules: Kamieniec II, Clock, Filter, Output, Sequencer. Signals: 2 audio, 1 gate, 1 clock.Kamieniec IIClockFilterOutputSequencerTuning FREQ: slowDepth: mediumResonance mode switch: wastedLFO resetclkInputgateOutput AaudioOutclkInaudioOutaudioInaudioGategateaudiogateclock
★ Resonant drone
Push resonance near self-oscillation · feed a sustained oscillator into the input · Output A becomes a formant-rich drone while the LFO Out can move a separate filter or VCA.
▸ Show diagram
Patch diagramPatch diagram with 4 modules and 4 connections. Modules: Kamieniec II, VCO, VCA, Output. Signals: 3 audio, 1 cv.Kamieniec IIVCOVCAOutputTuning FREQ: noonDepth: lowReso: highResonance mode switch: k-holedInputaudioLFO OutcvOutput AaudioSawaudioCVcvInaudioOutaudioInaudioaudiocv
Feedback color
Patch Output B back into the external modulation input with attenuation outside the module · the phase network turns more aggressive and nasal, with the feedback mode changing the peak count and harmonic bite.
▸ Show diagram
Patch diagramPatch diagram with 3 modules and 3 connections. Modules: Kamieniec II, Attenuator, Output. Signals: 2 audio, 1 cv.Kamieniec IIAttenuatorOutputTuning FREQ: midDepth: mediumReso: mediumResonance mode switch: stonedExt modcvOutput BaudioOutput AaudioInaudioOutcvInaudioaudiocv
Expanded long phaser
Install the Allpass Expansion, then use the phaser as a long, dense stage chain for a slow moving stereo wash. One knob sweep behaves more like a resonant room than a short effect.
▸ Show diagram
Patch diagramPatch diagram with 3 modules and 3 connections. Modules: Kamieniec II, Mixer, Output. Signals: 3 audio.Kamieniec IIMixerOutputTuning FREQ: slowDepth: mediumResonance mode switch: stonedOutput AaudioOutput BaudioIn 1audioIn 2audioOutaudioInaudioaudio

Behaviors

Dual output pair use Output A and Output B together

The module exposes two different mixed responses, so one patch point can behave like a stereo pair or two parallel phaser flavours.

Deep resonance raise Reso

The feedback path can enter self-oscillation around two-thirds of knob travel, making the module useful as a resonant filter-like voice as well as a phaser.

Three feedback modes switch wasted, k-holed, or stoned

The feedback topology changes the number and placement of resonant peaks, giving a wide palette from subtle swirl to aggressive comb-like grind.

Syncable LFO patch clock or trigger to LFO reset

The onboard triangle LFO can hard-sync to external timing, so the phaser sweep can stay locked to a clocked patch.

Expansion and chaining install Allpass Expansion or chain multiple modules

The optional expander extends the stage count to 22, and multiple Kamieniec units can be chained for denser, longer phaser textures.

Controls

Global Tuning FREQ Sets the base phase-rotation frequency, like a filter cutoff point.
manual tuning point
Global Depth Sets how much the onboard LFO and external CV move the phase network.
LFO + ext mod mix
Global Reso Controls feedback amount and resonance. Can reach self-oscillation.
extreme resonance possible
Global Resonance mode switch Selects wasted, k-holed, or stoned feedback topology.
wasted · k-holed · stoned
Global LFO rate Sets the onboard triangle LFO speed.
tens of seconds to low audio rate

I/O

IN · 5

  • Input audio AUDIO
    Audio into the phase-rotation chain.
  • Ext mod CV CV
    External modulation summed with the internal LFO.
  • Reso CV CV CV
    Voltage control over resonance.
  • LFO rate CV CV CV
    Voltage control over LFO speed.
  • LFO reset clock / trigger GATE
    Hard-sync reset for the onboard LFO.

OUT · 3

  • Output A audio AUDIO
    Four-stage mixed output with its own frequency response.
  • Output B audio AUDIO
    Six-stage mixed output with its own frequency response.
  • LFO Out CV / low audio CV
    Independent triangle LFO output.